IKA Dispersing Element Specifications
Specifications for T 25 digital ULTRA-TURRAX®Dispersion Unit
- Motor rating input/output：700W/500W
- Volume range min/max：1 to 2000 ml (H2O)
- 粘度最大：5000 mPAS
- Speed range：3000 to 25000 rpm
- Speed control：Stepless
- Speed display：LED
- Display resolution：200 rpm
- Speed deviation：1%
- Noise without element: 75 dB (A)
- Extension arm diameter：0.5 in. (13 mm)
- Extension arm length：6.30 in. (160 mm)
- Process type：batch
- Timer：No
- Permissible On time：100%
- Dimensions：(W x D x H ) 3.42 x 4.17 x 10.66 in. (87 x 106 x 271 mm)
- Weight：5.51 lbs. (2.5 kg)
- Permissible ambient temperature：5° to 40°C
- Permissible relative humidity：[%] 80%
- Protection class per DIN EN 60529：IP20
- Contamination level：2
- Protection class：II
- Overvoltage category：II
- Operation at a terrestrial altitude：Maximum 2000 m above sea level
- RX 232 interface; USB; analog output：No
- Voltage [V]：100-120V; 220-240V also available; Contact us for details
- Frequency：[Hz] 50/60 Hz
- Power input：700W
Dispersers for Coarse Preparations
| Parameter |
S 25 N-8 G |
S 25 N-10 G |
S 18 D-10 G-KS |
S 18 D-10 G-KS |
S 18 D-10 G-KS |
S 25 KV-25 G |
| Working range [ml] |
1-50 |
1-100 |
10-1500 |
50-2000 |
10-1500 |
50-2000 |
| Stator diameter [mm] |
8 mm |
10 mm |
18 mm |
25 mm |
18 mm |
25 mm |
| Rotor diameter [mm] |
6.1 mm |
7.5 mm |
12.7 mm |
17 mm |
12.7 mm |
17 mm |
| Gap between rotor and stator [mm] |
0.25 mm |
0.35 mm |
0.3 mm |
0.5 mm |
0.3 mm |
0.5 mm |
| Min. / max. immersion depth [mm] |
27/85 |
22/85 |
40/165 |
40/165 |
40/225 |
40/225 |
| Shaft length [mm] |
108 mm |
105 mm |
194 mm |
194 mm |
270 mm |
270 mm |
| Materials in contact with medium |
PTFE, SS316L |
PTFE, SS316L |
PTFE, SS316L |
PTFE, SS316L |
FFPM/SIC, SS316L |
FFPM/SIC, SS316L |
| pH range |
2-13 |
2-13 |
2-13 |
2-13 |
2-13 |
2-13 |
| Suitable for solvents |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
| Max. temperature |
180 |
180 |
180 |
180 |
220 |
220 |
| Sterilization methods |
All methods |
All methods |
All methods |
All methods |
Wet chemical |
Wet chemical |
| Min. vacuum [mbar] |
N/A |
N/A |
N/A |
N/A |
1 |
1 |
| Max. pressure [bar] |
N/A |
N/A |
N/A |
N/A |
6 |
6 |
Dispersers for Finer Preparations
| Parameter |
S 25 N-25 F |
S 25 N-10 G |
| Working range [ml] |
100-2000 |
100-2000 |
| Stator diameter [mm] |
25 mm |
|
| Rotor diameter [mm] |
18 mm |
|
| Gap between rotor and stator [mm] |
0.5 mm |
|
| Min. / max. immersion depth [mm] |
40/165 |
40/225 |
| Shaft length [mm] |
194 mm |
270 mm |
| Materials in contact with medium |
PTFE, SS316L |
FFPM/SIC, SS316L |
| pH range |
2-13 |
2-13 |
| Suitable for solvents |
Yes |
Yes |
| Max. temperature |
180 |
220 |
| Sterilization methods |
All methods |
Wet Chemicals |
| Min. vacuum [mbar] |
N/A |
1 |
| Max. pressure [bar] |
N/A |
6 |
Dispersing Elements with Saw Tooth Stators for T25 ULTRA TURRAX
| Parameter |
S 25 N - 8 G ST |
S 25 N - 10 G ST |
S 25 D - 18 G - ST |
S 18 D - 25 G - ST |
| Working range [ml] |
1-50 |
1-100 |
10-1500 |
50-2000 |
| Stator diameter [mm] |
8 mm |
10 mm |
18 mm |
25 mm |
| Rotor diameter [mm] |
6.1 mm |
7.5 mm |
12.7 mm |
17 mm |
| Gap between rotor and stator [mm] |
0.25 mm |
0.35 mm |
0.3 mm |
0.5 mm |
| Min. / max. immersion depth [mm] |
27/85 |
22/85 |
40/165 |
40/165 |
| Shaft length [mm] |
108 mm |
105 mm |
194 mm |
194 mm |
| Materials in contact with medium |
PTFE, SS316L |
PTFE, SS316L |
PTFE, SS316L |
PTFE, SS316L |
Disposable Dispersing Elements
| Parameter |
S 25 D - 10 G KS |
S 25 N - 10 G |
| Working range [ml] |
10-100 |
10-500 |
| Stator diameter [mm] |
10 mm |
14 mm |
| Rotor diameter [mm] |
6.75 mm |
9.5 mm |
| Gap between rotor and stator [mm] |
0.25 mm |
0.35 mm |
| Min. / max. immersion depth [mm] |
15/85 |
15/85 |
| Shaft length [mm] |
150 mm |
150 mm |
| Materials in contact with medium |
Polycarbonate Polyetheretherketon |
Polycarbonate Polyetheretherketon |
| Max. temperature |
100 |
100 |
| Sterilization methods |
autoclavable |
autoclavable |
| For dispersing instrument |
Dispersing element Shaft / Agitator shaft |
With seal or bearing type |
Generator or element |
With outer Diameter (mm) |
Degree of fineness achieved |
| 25 T数字 |
S 25 |
N/KV/NK |
-- |
8/10/18/19/25 |
G/F |
N = PTFE bearing
KV = Ball bearing with vacuum-tight sliding-ring seal with silicon carbide seal rings
NK = PTFE bearing with added ball bearing without seal
G = Coarse
F = Fine
|
